
Versatile design meets latest flat-panel technology
With its all-in-one design, the Ziehm Solo FD is one of the most compact C-arms on the market – now equipped with CMOSline flat-panel technology to perform a broad portfolio of applications.
Versatile viewing options and new dimensions in user friendliness offer maximum flexibility in the OR to support your clinical workflow.
With the latest improvements in dose regulations, the Ziehm Solo FD ensures best image quality at a minimized dose.

Achieve significantly more details
Image quality and efficiency are the most important but also challenging factors in daily clinical routine.
In comparison with conventional C-arms, the latest flat-panel technology CMOS achieves higher spatial resolution due to smaller pixel sizes combined with lower noise levels and a higher read-out speed at full resolution.
True resolution, especially in the magnification modes, makes interpolation unnecessary. CMOS technology therefore enables improved overall efficiency.

Ensure maximum flexibility
The Ziehm Solo FD is one of the smallest C-arms on the market. It comes as standard with a high-contrast 19″ DUO monitor mounted on an articulating monitor arm, eliminating the need for a separate monitor cart.
Despite the compact design, 165° of orbital movement enhances easy patient coverage and ensures a maximum of flexibility in the OR — fully counter-balanced in every position.







SmartDose
This comprehensive concept consists of a broad, clinically proven application portfolio to address the daily challenges of low dose and high image quality. With significant dose savings, Ziehm Imaging sets the benchmark in user-friendly adjustment of dose exposure1.
Laser positioning device
Integrated in flat-panel and generator housing for accurate and dose-free positioning of C-arm
Anatomical programs
With automatic optimization of dose and image quality for best results
Low dose mode
In all anatomical programs for particularly dose-sensitive procedures, e.g. in pediatrics
Removable grid
To reduce dose in pediatric and other dose-sensitive procedures
Reduction of pulse frequency
Manually or fully automatically to lower the accumulated dose
High-speed ADR
For intelligent, fast regulation of pulse rate to lower the dose level
Premag
For exposure-free magnification of X-ray images
Virtual collimators
For exposure-free positioning of collimators
Object Detected Dose Control (ODDC)
To automatically analyze the area of interest and minimize dose while optimizing image quality2
ZAIP
To display fast-moving objects like guide wires and even the smallest vessels in razor-sharp image quality
Automatic adjustment
For large patients – with no additional increase in dose
Beam filtration
For reduced skin entrance dose without compromising on image quality3
1. In clinical practice, the use of SmartDose may reduce patient dose depending on the clinical task, patient size, anatomical location, and clinical practice. A consultation with a radiologist and a physicist should be made to determine the appropriate dose to obtain diagnostic image quality for the particular clinical task. 2. Gosch D. et al. “Influence of grid and ODDC on radiation exposure and image quality using mobile C-arms – First results”, RöFo, 09/07. 3. The technology Beam Filtration reduces dose exposure for all CMOSline systems in comparison to conventional filtration techniques (Status before September 2017). Data on file. Results may vary.
Specifications
Mechanical
C-arm vertical free space | 34″ / 87cm |
---|---|
C-arm depth | 27″ / 68cm |
Weight | 765lb (± 3%) / 347kg |
Height | 69″ – 85″ / 175 – 217cm |
Width | 31.5″ / 80cm |
Length | 67″ – 76″ / 171 – 193cm |
Flat-panel
Type | CMOS technology |
---|---|
System resolution (Nyquist) | 5 lp/mm |
Detector size | 20.5cm x 20.5cm |
Field size | 2 k x 2 k |
Mag mode 1 | 1.5 k x 1.5 k |
Mag mode 2 | 1 k x 1 k |
Monitor
Display size | 19″ (x2) |
---|---|
Brightness (panel) | typ. 1000 cd/m2 |
Ziehm Viewing Station | Optional |
Electrical
Power supply | 120 VAC, 60 Hz ± 10% |
---|
X-ray generator
X-ray tube | Stationary anode |
---|---|
Generator type | Monoblock |
High-frequency generator | 40 kHz |
Maximum output | 2.4 kW |
Pulsed fluoroscopy kV range | 40 – 120 kV |
Pulsed fluoroscopy mA range | 0.2 – 20 mA |
Pulse rates | 25, 12.5, 8, 4, 2, 1 pps |
Image processing
USB port | DICOM, TIFF, Multimedia (AVI), JPG |
---|---|
Image capacity | 100,000 |
Multifunction wireless foot switch | Optional |
Wireless communication | Optional |
Printer | Optional |
DVI (external monitor) | Optional |
DICOM classes | ✓ |
Laser alignment | ✓ |
Vascular package (OPTIONAL)
DSA real-time subtraction with re-masking capability | ✓ |
---|---|
Pixel shift / landmarking | ✓ |
